Industry ON/ OFF Shore

Convocation points:

 

 W (Witness): The point of which the Contractor and/or Inspection. Authorities must be notified. The Manufacturer may proceed if the Contractor and/or Inspection Authorities will not be present.

H (Hold): The point of which the Contractor and/or Inspection. Authorities must be notified. The Manufacturer shall not proceed unless specifically so instructed by the party indicating the hold point.

M (Monitoring): Inspection will take place during visits as a standard performance.

R (Documentary Review): Verification of document/report by the party concerned if data given in inspection document(s)meets the requirements.

 

All kind of inspections:

 

Heat exchanger, Air collers, Bundles,  Forging (sockets, shackles, swivels, Rov hook, H/Y links…), Generating Set, Valves (ball, gate, globe, butterfly, swing check valves…cryogeniec valve, 12”, 16”, 18”, 30”..), Pumps, Control panel, LV distribution board, switchboard, Rig skidding drive,  External Welding trolleys, Fugitives emission (standard ISO 15848-1), Davits, winches, Navigation beacons (masts, pylons, buoys, floats supports…), Chillers skids, Tensioners, Flexible hoses (Fire test ISO 14692), tank/skid, Flowmeter......etc

 

  • PIM, KOM, MOM, ITP (to define the      chronological inspections activities, references procedures & various      criteria…)
  • Operators Qualifications (Cofrend,     Frosio…): Painting, Welding, NDE ( PT, MT, UT, RT, ET, PMI…)
  • NACE certificates,
  • Reports: IRC, NCR, PL, FR, IRN……
  • Running test, FAT, GAD, Procedures     (welding, NDT, painting & coating…)
  • Visual inspection regarding quality,     workmanship, origin, dimensional  & conformity of the material ordered
  • Mechanical tests
     Check of quantities according to the list of equipment of materials ordered
  • Check types & models against technical specifications
  • Review manufacturers test certificates, test reports and drawings as per the contract (GAD, SDR, MRB, MPQ, MPS…)
  • Control quantity to ensure all items are in conformity with the order.Check packing and marking against contract requirements to ensure suitability of packing for transportation by air, sea or road. 

 

 

MISCELLANEOUS

METROLOGY
DIMENSIONAL CHECK
GALVANIZATION PROCES
GALVANIZATION
TRANSPONDER UNIT
TRANSPONDER TESTS
TENSIONNER
TENSIONNER
TENSIONNER
DAVIT TESTS
DAVIT TESTS
DAVITS TESTS
WINCH TESTS